Why is my tap water brown? What it means, and what to do
Last checked November 18, 2026.
Brown, rusty or yellow tap water that shows up all at once is usually sediment from the water main, stirred loose by hydrant flushing, a main break or road work nearby. It often clears in minutes. Here is how to clear it, what to avoid, and when to call the company that runs your water.
The short answer
- A sudden change in color usually comes from the mains outside, not your pipes. Hydrant flushing, a main break and road work change the flow and stir up mineral sediment, mostly iron and manganese.
- Run the cold tap at the lowest point in your home until the water runs clear. Leave the hot water and the washing machine off until it does.
- If it doesn’t clear after about 15 to 20 minutes, call your water utility. Until it’s clear, don’t drink it or cook with it.
Why it happens
Iron and manganese settle in water mains over time. When the water moves faster or changes direction, as it does when crews open hydrants, fix a break or work near a main, that sediment gets stirred up and flows out of your faucets. Madison’s water utility names road construction, main breaks and main flushing as the usual causes.
| What you see | The usual cause |
|---|---|
| Rusty, reddish-brown or yellow | Iron |
| Darker brown to black | Manganese, or iron and manganese together |
| Brown only from the hot tap | Sediment in your water heater, a question for a plumber |
The EPA lists iron and manganese among its secondary standards, the ones for color, taste and staining rather than health. Above those levels, water can look rusty or brown, taste metallic and stain sinks and laundry. The U.S. Geological Survey says both metals can stain fixtures and laundry but are not known to cause health problems.
How to clear brown water
- Turn the cold tap on all the way at the lowest faucet in your home, such as a basement sink or a bathtub.
- Run it until the water is clear. Five to 10 minutes is typical. If it’s still colored, wait about an hour and try again, because the main outside may still be clearing.
- Then run the other cold taps for a minute each.
- Clean the screen (aerator) at the tip of the faucet if the flow looks weak or gritty.
What not to do while it’s brown
- Don’t run the hot water. It pulls the brown water into your water heater, and then the tank has to be flushed too.
- Don’t do laundry. Discolored water can stain clothes, especially whites. Wait until the cold water is clear.
- Don’t drink it or cook with it. Utilities say discolored water isn’t harmful in the usual case, but they still advise waiting until it runs clear.
When to call your water utility
- The cold water is still brown after 15 to 20 minutes of running.
- It keeps coming back on days with no crews or flushing nearby.
- The water smells, or there’s a boil water notice or other alert for your area. Follow the notice, not this page.
The utility will want to know when it started, whether the hot and cold taps are both affected, what color it is, and whether you’ve seen crews or an open hydrant nearby. The number is on your water bill and the utility’s website.
How to know about flushing before it starts
Most utilities post their hydrant flushing schedule by street or zone, often in spring or fall, and many have an alert list for main breaks and outages. Check the utility’s website, or its social media page. Towns also announce flushing and main work to residents, and MailerDot sends one free email a day for your town, so a notice like that is often in the next morning’s email.
Find your town’s free daily email →
Sources
- City of Madison Water Utility — Discolored Water (read November 18, 2026)
- Aquarion Water Company — Discolored Water (read November 18, 2026)
- U.S. EPA — Secondary Drinking Water Standards: Guidance for Nuisance Chemicals (read November 18, 2026)
- U.S. Geological Survey — What can be causing our drinking water to have a reddish color? (read November 18, 2026)